What are the drill diameters offered with the solid metal guide?

The solid metal guide offers six common drill diameters: 1/8, 3/16, 1/4, 5/16, 3/8, and 1/2.

Does the ergonomic design alleviate awkwardness?

Yes, the ergonomic handy design fits into the hands with ease and alleviates awkwardness.

What prevents the DrillBlock from slipping and marring on wooden work pieces?

Non-slip feet hold the Drillblock in place while preventing both slipping and marring on wooden work pieces.

Can this withstand Dewalt titanium drill bits?

Yes, as long as you use the proper size bit in the mating hole.

The Milescraft drill guide is 1 1/16 inch thick by 4.5 inches long.

What are the bushing diameters?

The drill diameters are 1/8, 3/16, 1/4, 5/16, 3/8, 1/2.

How well does this work drilling holes into a 1" pipe? How wide is the channel (on the bottom) the pipe would fit into?

This drill block works well on all diameters of pipe or tubing from 1/8" to a maximum of about 8". The channel width may vary.

How well do the no-slip feet hold the jig in place?

The feet help fix the unit, but it is recommended to hold the guide firmly with one hand or clamp it for critical holes.

Does this dull the bit?

In general, the quality of the steel in a drill bit is higher than that of the guide bushings. The bushings are usually slightly larger than the diameter of the bit, which helps prevent dulling.

What is the distance from the end of the block to the 1/8 in hole?

From the edge, it is approximately 1 7/32 inches from the tip of the V.

Is it possible to use this to drill a hole in the center of the side of a wood that has a width of 0.75"?

As long as you can hold the drill block steady or clamp it, you can drill a hole in the center of a wood with a width of 0.75".

Will this work with a Dremel tool?

If the bit in your Dremel tool does not exceed the hole in the drill guide, it will work.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/61JJtunPwRL._AC_SL1500_.jpg

https://m.media-amazon.com/images/I/61NlOD4YwwL._AC_SL1500_.jpg

https://m.media-amazon.com/images/I/71-3reVtZmL._AC_SL1500_.jpg

https://m.media-amazon.com/images/I/71CPJYi6twL._AC_SL1500_.jpg

Milescraft

Milescraft 1312 Drill Block - Handheld Drill Guide, Drilling Jig for 6 of the Most Common Drill Bit Sizes

Item #:1340625

4.7 rating

Write a review

PKR 2247
0

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Drill straight holes every time with the ergonomic and handy design of DrillBlock. The inserted solid metal guide offers six common drill diameters and the non-slip feet hold the Drillblock in place.

Product Details

Package Weight

Features & Benefits

Drill straight holes every time
Inserted solid metal guide offers six common drill diameters
Ergonomic handy design fits into the hands with ease
Non slip feet hold the Drillblock in place
Two product v grooves for usage on corners and cylindrical surfaces
Package dimensions: 3.05''L x 5.33''W x 14.48''H

Product Description

Overview

Milescraft 1312 Drill Block - Handheld Drill Guide, Drilling Jig for 6 of the Most Common Drill Bit Sizes

About This Item

Introducing the Milescraft 1312 DrillBlock- Handheld Drill Guide, the ultimate tool for precise and accurate drilling. Whether you're a DIY enthusiast or a professional, this drill guide will revolutionize your drilling experience. With the Milescraft DrillBlock, you can finally say goodbye to crooked holes and uneven surfaces. Its innovative design ensures that you drill straight holes every time, no matter the angle or surface.

The two product v-grooves make it suitable for use on corners and even cylindrical surfaces, giving you unparalleled versatility. One of the standout features of the DrillBlock is its inserted solid metal guide, which offers six common drill diameters: 1/8, 3/16, 1/4, 5/16, 3/8, and 1/2. This means you don't have to fumble around with multiple drill bits or worry about measuring the correct size. Simply select the desired diameter on the guide, and you're good to go. We understand the importance of comfort and ease of use, which is why the DrillBlock features an ergonomic and handy design.

It fits perfectly into your hands, alleviating any awkwardness that comes with holding a drill for extended periods. This ensures maximum control and precision with every drill. Whether you're working on woodworking projects, metalworking tasks, or various DIY or construction projects, the Milescraft DrillBlock is the ideal companion. It provides exceptional accuracy, making it perfect for both beginners and experienced users alike.

Have any Query?Chat with us

Customer Questions & Answers

Question : What are the drill diameters offered with the solid metal guide?
Answer : The solid metal guide offers six common drill diameters: 1/8, 3/16, 1/4, 5/16, 3/8, and 1/2.
Question : Does the ergonomic design alleviate awkwardness?
Answer : Yes, the ergonomic handy design fits into the hands with ease and alleviates awkwardness.
Question : What prevents the DrillBlock from slipping and marring on wooden work pieces?
Answer : Non-slip feet hold the Drillblock in place while preventing both slipping and marring on wooden work pieces.
Question : Can this withstand Dewalt titanium drill bits?
Answer : Yes, as long as you use the proper size bit in the mating hole.
Question : How thick is it?
Answer : The Milescraft drill guide is 1 1/16 inch thick by 4.5 inches long.
Question : What are the bushing diameters?
Answer : The drill diameters are 1/8, 3/16, 1/4, 5/16, 3/8, 1/2.
Question : How well does this work drilling holes into a 1" pipe? How wide is the channel (on the bottom) the pipe would fit into?
Answer : This drill block works well on all diameters of pipe or tubing from 1/8" to a maximum of about 8". The channel width may vary.
Question : Where is this made?
Answer : This product is made in China.
Question : How well do the no-slip feet hold the jig in place?
Answer : The feet help fix the unit, but it is recommended to hold the guide firmly with one hand or clamp it for critical holes.
Question : Does this dull the bit?
Answer : In general, the quality of the steel in a drill bit is higher than that of the guide bushings. The bushings are usually slightly larger than the diameter of the bit, which helps prevent dulling.
Question : What is the distance from the end of the block to the 1/8 in hole?
Answer : From the edge, it is approximately 1 7/32 inches from the tip of the V.
Question : Is it possible to use this to drill a hole in the center of the side of a wood that has a width of 0.75"?
Answer : As long as you can hold the drill block steady or clamp it, you can drill a hole in the center of a wood with a width of 0.75".
Question : Will this work with a Dremel tool?
Answer : If the bit in your Dremel tool does not exceed the hole in the drill guide, it will work.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

Milescraft 1312 Drill Block - Handheld Drill Guide, Drilling Jig for 6 of the Most Common Drill Bit Sizes

The Milescraft 1312 DrillBlock is a handheld drill guide that helps to drill at awkward angles, allowing for precise holes. It accommodates 6 drill bit sizes but has a stable and sturdy base with rubber feet to prevent sliding. The product is of good build quality and is lightweight, making it easy to use. However, while the no-slip feet help fix the unit, it may still require a firm hold to prevent moving during critical holes. Customers have used the guide to drill into a variety of materials and have found it very helpful, with some wishing they had purchased it earlier. It is 1 1/16 inch thick, 4.5 inches long, and made in China.

Pros

Lightweight and easy to use
Stable and sturdy base with rubber feet
Accommodates 6 drill bit sizes
Helps to drill at awkward angles
Good build quality

Cons

May require a firm hold to prevent movement during critical holes
Only accommodates 6 drill bit sizes

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

Milescraft 1312 Drill Block - Handheld Drill Guide, Drilling Jig for 6 of the Most Common Drill Bit Sizes

View Cart & Checkout