What is the height of the Item package?

The height of the Item package is 2.2 inches.

What is the voltage compatibility of these contactors?

These contactors are suitable for devices up to 600 volts.

Is this the same unit as my OEM model number 3100-15q108 relay? Does anyone know what this number mean whether how many pole and what is the max Amp

The C140A listed above has a 40 amp capacity whereas your original contactor appears to only have a 30 amp capacity. It has one switched pole that one hot leg feeds through to the compressor and one fixed (always on) pole for the other hot leg that feeds the other side of the compressor and the case heater.

Report recommending to install start component to assist starting amp matching 45/5uF 370/440V capacitor. What component is this?

This would be the motor start capacitor. It is recommended to replace both at the same time.

My original contactor has t3 and l3 and this part instead has t2 and l2. Will this work?

If you have a t3 and i3, it looks like you have a 3 phase unit. This contactor is for a single phase 220 volt unit and would not work.

Could this contactor replace the existing contactor 3100-15Q228? Any precautions?

The replacement is a 1 pole contactor with a 24 volt coil and meets or exceeds the amperage rating, it will work fine.

What is the inductance value of the coil?

The inductance value is determined by the number of turns in the coil. This coil has a 24 volt coil.

Will this unit compatible with my OEM American Standard 3 ton compressor model # 3100-15q242 contactor, part# c147094p02?

As long as it's a single switch/pole contactor and you keep the switch on the same side, it should be compatible.

Is this Packard C140A 1 Pole 40 Amp Contactor 24 Volt Coil Contactor the same as Carrier HN51KC024 Contactor 24 volt LRA: 150/75/50 HZ 50/60

The low voltage coil voltage (24 volts) and number of poles must match, but the contactor rating must have equal or higher amps. If yours is rated at 25 or 30 amps or anything less than 40 amps, this one is OK. The coil is AC voltage.

Why does it hum so much? Is the coil 24 v ac. or d.c.?

If it makes noise, you will have to change it out with another one. The coil is AC voltage.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/41PDnH86RVL.jpg

https://m.media-amazon.com/images/I/51+E1+luyxL.jpg

https://m.media-amazon.com/images/I/41TjqDTwnRL.jpg

https://m.media-amazon.com/images/I/51u+38ZD0+L.jpg

Packard

Packard C140A 1 Pole 40 Amp Contactor 24 Volt Coil Contactor

Item #:42539691

4.6 rating

Write a review

PKR 5852PKR 8802 You Save : 34%
Price Detail
Price
PKR 5852
Excluding Shipping & Custom charges
( Shipping and custom charges will be calculated on checkout )
* All items will be imported from US Store

Order now and get it around Tuesday, May 28

Availability : In Stock

Imported from USA store

Quantity :

Ships from Ubuy, Sold By :

partshousesupply

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.)

Contactors meet ul 508 specs for devices up to 600 volts.

Product Details

Model Number: C140A
Item Package Length: 3.49999999643"
Item Package Width: 2.799999997144"
Item Package Height: 2.199999997756"

Is Discontinued By Manufacturer	No
Product Dimensions	1 x 1 x 0.5 inches (2.5 x 2.5 x 1.3 cm);0.2 ounce (5.67 grams)
Item model number	C140A
Department	Unisex-Adult
Batteries	1 Unknown batteries required.
Date First Available	June 29, 2010
Manufacturer	Packard
What's in the box	Packard C140A 1 Pole Contactor Coil Contactor, 40 Amp, 24V

Features & Benefits

UL 508 specs Compliant Contactors
Suitable for devices upto 600 Volts
Class B insulation Coils, Lug, Spade Terminals, Covers included
Model Number: C140A
Item Package Dimensions: 3.5 x 2.8 x 2.2 inches

About This Item

Introducing the Packard C140A 1 Pole Contactor Coil Contactor, designed to meet UL 508 specifications for devices up to 600 volts. This high-quality contactor is perfect for your electrical needs. With a 40 Amp capacity, this Packard C140A Contactor ensures optimal electrical performance. It features a 24V coil with Class B insulation, providing reliable and safe operation.

The contactor includes lug and spade terminals, making installation a breeze. Whether you're looking to replace an existing contactor or upgrade your electrical system, the Packard C140A Contactor is the perfect solution. Its compact design and durable construction make it suitable for a wide range of applications. Don't settle for subpar contactors when you can trust the Packard brand. Our contactors are known for their exceptional quality and performance.

Trust us to deliver reliable, efficient, and long-lasting products. Upgrade your electrical system today with the Packard C140A 1 Pole Contactor Coil Contactor. It's available for online purchase, making it convenient for you to get the electrical supply you need. Trust the leading supplier of electrical contactors and choose Packard..

Have any Query?Chat with us

Customer Questions & Answers

Question : What is the model number of the contactor?
Answer : The model number is C140A.
Question : What is the height of the Item package?
Answer : The height of the Item package is 2.2 inches.
Question : What is the voltage compatibility of these contactors?
Answer : These contactors are suitable for devices up to 600 volts.
Question : Is this the same unit as my OEM model number 3100-15q108 relay? Does anyone know what this number mean whether how many pole and what is the max Amp
Answer : The C140A listed above has a 40 amp capacity whereas your original contactor appears to only have a 30 amp capacity. It has one switched pole that one hot leg feeds through to the compressor and one fixed (always on) pole for the other hot leg that feeds the other side of the compressor and the case heater.
Question : Is it convertible N/0- N/C?
Answer : No, it is not convertible.
Question : Report recommending to install start component to assist starting amp matching 45/5uF 370/440V capacitor. What component is this?
Answer : This would be the motor start capacitor. It is recommended to replace both at the same time.
Question : My original contactor has t3 and l3 and this part instead has t2 and l2. Will this work?
Answer : If you have a t3 and i3, it looks like you have a 3 phase unit. This contactor is for a single phase 220 volt unit and would not work.
Question : Could this contactor replace the existing contactor 3100-15Q228? Any precautions?
Answer : The replacement is a 1 pole contactor with a 24 volt coil and meets or exceeds the amperage rating, it will work fine.
Question : What is the inductance value of the coil?
Answer : The inductance value is determined by the number of turns in the coil. This coil has a 24 volt coil.
Question : Will this unit compatible with my OEM American Standard 3 ton compressor model # 3100-15q242 contactor, part# c147094p02?
Answer : As long as it's a single switch/pole contactor and you keep the switch on the same side, it should be compatible.
Question : Is this Packard C140A 1 Pole 40 Amp Contactor 24 Volt Coil Contactor the same as Carrier HN51KC024 Contactor 24 volt LRA: 150/75/50 HZ 50/60
Answer : The low voltage coil voltage (24 volts) and number of poles must match, but the contactor rating must have equal or higher amps. If yours is rated at 25 or 30 amps or anything less than 40 amps, this one is OK. The coil is AC voltage.
Question : Why does it hum so much? Is the coil 24 v ac. or d.c.?
Answer : If it makes noise, you will have to change it out with another one. The coil is AC voltage.

Customer Ratings

4.6 out of 5

1443 customers ratings

5 star
78%
4 star
12%
3 star
4%
2 star
2%
1 star
3%

Review this product

Share your thoughts with other customers

Packard C140A Motor Contactors Editorial Review

The PC140A Contactor Single One 1 Pole 40 Amps 24 Volts AC Air Conditioner is a contactor switch for air conditioners that has a 40 amp capacity with a 24 volt coil. Customers have reported that it is easy to install and has identical connections with the original contactor, allowing for convenient replacement. It is compatible with most residential AC units, and customers have reported success in using it for their older models. However, some customers have reported that the contactor failed after a short period of use, with the contacts sticking closed or the device making strange noises. While the replacement works fine and has higher amps than the original contactor, some customers recommend replacing it every year or keeping a spare in hand.

Pros

Easy to install
Compatible with most residential AC units
Identical connections with the original contactor
Affordable price

Cons

Some customers reported device failure after a short period of use
Contacts may stick closed or make strange noises

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

Packard C140A 1 Pole 40 Amp Contactor 24 Volt Coil Contactor

View Cart & Checkout