Question : What is the max weight limit for this mount?
Answer : The mount can hold up to 79lbs.
Question : What VESA patterns does this mount support?
Answer : It supports VESA standard patterns 75x75 to 400x400 mm and non VESA up to 400x400 mm.
Question : Does this mount work for flat and curved screens?
Answer : Yes, it fits both flat and curved screens, as well as screens with unique structures.
Question : Our 50" samsung tv is located in our great room book shelf. clearances within the shelf is 24" deep x 27" tall and 52" wide. will we have a problem?
Answer : All depends on where your studs are located behind the wall. It will clear the opening, it is 30" of an extension from the back wall to where the mount is to the back of the TV. You have to mount all 4 lag bolts to a stud to get the most strength to support the weight of the TV.
Question : Will this work with a computer monitor?
Answer : If you have a small monitor you will see the bracket. The bracket does not adjust for height once it is mounted.
Question : Can the arms on the x bracket be removed if i just want to hold up a laptop? what are the dimensions of the x bracket?
Answer : The 4 brackets are each 10 inches long. It looks like you can remove them. We use the mount for a TV. If you install the mount on the wall horizontally (instead of vertically as we did for the TV), you might be able to set a laptop on the plate that the brackets attach to. Hope this helps.
Question : 30" arm model. What is the length of the first arm from the wall? Looks about 15" inches?
Answer : Hi, Thank you for contacting us. The length of the first arm from the wall is 14.8 inches. Hope to inform you sufficiently. Please do not hesitate if anything else is needed. Barkan team
Question : I have noticed reviews where the bracket was "split" how does this work? Are there two separate arms?
Answer : The bracket I received has one arm with an elbow in the middle. It actually looks exactly like the picture. The 4 smaller arms that attach to the monitor independently rotate to align with the monitor dimensions of its mounting nuts.
Question : I need to get the pdf installation manual to my installer. how can i get this pdf so i can transmit via email to my installer?
Answer : Hi John, Please see a link to the product installation manual: https://www.barkanmounts.com/_files/ugd/3b0a3f_0b975427d763440d9f8c1762adfa1441.pdf Please let me know if there is anything else you need. Thank you, Barkan Team
Question : I read that the mount is supposed to hold 3 times the weight of the TV and that would be 119lbs. should I worry about this?
Answer : Hi Sandra, This mount, BM343XL, is designed to hold up to 80 lbs. If your TV weight is 80 lbs. or less, it will hold with no problem. The 3 times load factor has been done as a safety check. We do it to make sure the wall mount has been tested under more severe conditions, to ensure it will not come off the wall under normal use conditions. Hope to inform you sufficiently. Please do not hesitate if anything else is needed. Barkan team
Question : What is the center to center bolt spacing i.e. distance between the top to bottom bolts on the part that actually mounts to the wall? Thank You
Answer : The distance is right at 4 1/2 inches between bolts, top to bottom. Hope this helps.
Question : How much weight will this support in the fully extended position?
Answer : My Barkan Long Wall Mount is rated at 79 lbs fully extended. I have a Samsung 65" that weighs 50 lbs and it is extremely steady. All 3 of my wall mounting bolts are drilled into a wall stud which I highly recommend.
Question : If i get the 30" will a 65" tv swivel 90 degrees?
Answer : Hi Michael, Thank you for your email. This product can swivel a 65-inch TV at 80 to 90 degrees to the wall (depending on the TV width). Hope to inform you sufficiently, Please do not hesitate if anything else is needed. Thank you, Barkan team