KAKA INDUSTRIAL PR-3 Ring Roll Bender, 3inch Manual Roll Bender,Manual Sheet Steel Ring Roll Bender up to 1/4" round bar and 1" x 3/16" flat bar, easy to operate.

The Kaka Industrial TR-60 Tube Roll Bender is a ring roller meant for bending 1/4" OD tubing. It does not have a diameter setting, and the size of the bend depends on the length of the material. It is good for making rings, with rolls that turn without slipping up to 1/8" in diameter. The rollers are knurled, so there may be a pressing mark left on soft metals like brass. This tool is not meant for making decorative bends. Customers find that the Kaka Industrial TR-60 Tube Roll Bender does what it is supposed to do, with some noting the need to modify the handle. One reviewer uses it to make plant cages, while another made 8" diameter rings with it. The unit is sturdy and may require some thread locker to help with the two-part handle. The rubber part of the handle may rub and cause blisters, making it uncomfortable to use. Some customers found that the machine struggled with gripping the material, leading to slippage, despite having knurled rollers. One customer was disappointed that they had to send it back because it slipped too much, and its knurling was not sufficient to hold their material. Another noted that it is a low-cost tool and may not be the best for commercial use. Overall, the Kaka Industrial TR-60 Tube Roll Bender is good for hobbyists and homeowners but may not be suitable for professional use.