What is the size of the MultiSensor 6?

The MultiSensor 6 measures just 1.65 inches in size.

Can the MultiSensor 6 be installed in a ceiling or wall cavity?

Yes, with the Recessor accessory, the MultiSensor 6 can be seamlessly installed within a ceiling or wall cavity.

How is the MultiSensor 6 powered?

The MultiSensor 6 can be powered either by batteries or by mains power.

What size hole do I need to make?

For a precision fit, a 2 5/8" hole is recommended. However, a 2 3/4" hole can also be used for some wiggle room. Avoid a 3in hole to prevent wearing away the drywall eventually.

Can the recessor be used with the trisensor?

Yes, the z-wave multisensor 6 Recessor can be used with Aeotec TriSensor.

What exactly is the "multisensor" used for?

The multisensor holder is for the Aeotec ZW100 sensor which detects motion, temperature, humidity, light, UV, and vibration.

Does this fit the siren of a doorbell 6 model?

No, it is designed for MultiSensor 6 and TriSensor devices only.

Is this bracket made of metal or plastic?

The enclosure itself is plastic, while the arms with springs retaining it into the wall are metal.

Does this allow the sensor to swivel?

Yes, this enclosure allows the sensor to swivel and tilt for installation in the ceiling.

Will this work with the new Multisensor 7?

Yes, it will allow you to attach a MultiSensor 7 in place of a MultiSensor 6. The form factor and size of the MS7 will be the same as the MS6.

Do you have to remove the Recessor completely to change the batteries?

Yes, the spring-loaded ears allow you to pull it out of the wall for battery change, but it should be done without scuffing the paint.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/41VC9KNCKVL.jpg

https://m.media-amazon.com/images/I/31Dkk2tYfYL.jpg

https://m.media-amazon.com/images/I/31qZJ0CqeEL.jpg

https://m.media-amazon.com/images/I/31xBZ-9hKDL.jpg

AEOTEC

Aeotec MultiSensor 6 Recessor. in-Ceiling and in-Wall recessed Installation Accessory.

Item #:3421069

4.3 rating

Write a review

PKR 9959
Price Detail
Price
PKR 9959
Excluding Shipping & Custom charges
( Shipping and custom charges will be calculated on checkout )
* All items will be imported from US Store

Order now and get it around Friday, May 17

Availability : In Stock

Imported from USA store

Quantity :

Ships from Ubuy, Sold By :

Home Controls, Inc.

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.)

Compact and invisible, the MultiSensor 6 is a versatile device that can be seamlessly integrated into any space.

Product Details

Install MultiSensor 6, MultiSensor 7, or TriSensor within a wall or ceiling for flush mount appearance
Enables recessed, near invisible installation of MultiSensor 6, MultiSensor 7, or TriSensor
Does not impact ability to utilize USB power to sensor if sensor is capable
Allows for easy removal of sensor for changing batteries if battery powered
Simple, spring-loaded installation

Is Discontinued By Manufacturer	No
Product Dimensions	3.4 x 1.7 x 3.4 inches (8.6 x 4.3 x 8.6 cm);1.76 ounce (49.9 grams)
Item model number	DSE010
Date First Available	November 24, 2015
Manufacturer	Aeotec
Brand	AEOTEC
Item dimensions L x W x H	3.4 x 1.7 x 3.4 inches (8.6 x 4.3 x 8.6 cm)
Material	Plastic
Item Weight	1.76 ounces (49.9 grams)
Style	Recessor Accessory
What's in the box	Multisensor 6 Recessor

Have any Query?Chat with us

Customer Questions & Answers

Question : What is the size of the MultiSensor 6?
Answer : The MultiSensor 6 measures just 1.65 inches in size.
Question : Can the MultiSensor 6 be installed in a ceiling or wall cavity?
Answer : Yes, with the Recessor accessory, the MultiSensor 6 can be seamlessly installed within a ceiling or wall cavity.
Question : How is the MultiSensor 6 powered?
Answer : The MultiSensor 6 can be powered either by batteries or by mains power.
Question : What size hole do I need to make?
Answer : For a precision fit, a 2 5/8" hole is recommended. However, a 2 3/4" hole can also be used for some wiggle room. Avoid a 3in hole to prevent wearing away the drywall eventually.
Question : Can the recessor be used with the trisensor?
Answer : Yes, the z-wave multisensor 6 Recessor can be used with Aeotec TriSensor.
Question : What exactly is the "multisensor" used for?
Answer : The multisensor holder is for the Aeotec ZW100 sensor which detects motion, temperature, humidity, light, UV, and vibration.
Question : Does this fit the siren of a doorbell 6 model?
Answer : No, it is designed for MultiSensor 6 and TriSensor devices only.
Question : Is this bracket made of metal or plastic?
Answer : The enclosure itself is plastic, while the arms with springs retaining it into the wall are metal.
Question : Does this allow the sensor to swivel?
Answer : Yes, this enclosure allows the sensor to swivel and tilt for installation in the ceiling.
Question : Will this work with the new Multisensor 7?
Answer : Yes, it will allow you to attach a MultiSensor 7 in place of a MultiSensor 6. The form factor and size of the MS7 will be the same as the MS6.
Question : Do you have to remove the Recessor completely to change the batteries?
Answer : Yes, the spring-loaded ears allow you to pull it out of the wall for battery change, but it should be done without scuffing the paint.

Customer Ratings

4.3 out of 5

87 customers ratings

5 star
62%
4 star
20%
3 star
11%
2 star
4%
1 star
3%

Review this product

Share your thoughts with other customers

AEOTEC DSE010 Editorial Review

The Aeotec MultiSensor 6 Recessor is a great accessory for those looking to seamlessly integrate a sensor into their walls or ceiling. The flush design looks nice and gives your home automation system a professional look. It is a perfect fit for the MultiSensor 6 and TriSensor devices, allowing for easy installation and a clean appearance. The enclosure is made of plastic, with metal arms that retain it into the wall. The Recessor also allows for swiveling and tilting of the sensor, providing flexibility in positioning. However, there have been some reports of poor build quality, with some users experiencing cracks in the enclosure when bending the spring clips. This can be disappointing Considering the relatively high price of the accessory. Additionally, some users have mentioned that the pricing of both the Recessor and the MultiSensor 6 itself is higher than expected. Overall, the Aeotec MultiSensor 6 Recessor is a great solution for those wanting a professional and sleek look for their home automation system. While there are some concerns about build quality and pricing, it remains the best option currently available until competitors enter the market.

Pros

Flush design looks nice on garage ceiling
Perfect fit for the MultiSensor 6 and TriSensor devices
Open back design allows for cable access
Swivel and tilt capability
Secure mounting

Cons

Poor spring build quality
Higher pricing than expected Summarized

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

Aeotec MultiSensor 6 Recessor. in-Ceiling and in-Wall recessed Installation Accessory.

View Cart & Checkout