What is the package weight of the product?

The package weight of the product is 8 Ounces.

What type of power protection does it offer?

It offers Type 2 AC Power protection.

Does it have LED status indication?

Yes, it has LED status indication.

Why is there only one view of the product? Do I not see the pigtail wires? Does it snap into place like a breaker?

It has 4 pigtail wires and does not snap in. 2 pigtails tie to the breaker, one wire to the neutral and one to the ground bar. It is mounted in one of the knockouts on the main breaker panel. You might have to cut an opening in the wall. If this is installed on an existing breaker panel, it is recommended to pay extra bucks for the cover plate.

Can this be located on the inside of the breaker panel, provided there is enough space for it?

It is suggested to mount outside the panel as it is less effective when placed inside. However, if there is enough space to mount it inside, it can be mounted. It has to be mounted as close to the main breaker as possible so that it takes the blast before it hits the other circuits in the house.

What is the length of the wires that come with the unit?

The 4 wire leads are around 13 inches long.

Is this the best way to protect the whole house and all the AV equipment?

Yes, it is the best way to protect the whole house as it will fry before the surge gets to other circuits. It should be mounted as close to the main breaker as possible. Once it is tripped, it has to be replaced.

Will this unit protect the home from EMP or CME?

It can protect against E3, but it is unsure if this specific model can protect.

Can I connect this to a 40A range circuit breaker if my electrical panel is full?

No, you need a 50A breaker dedicated to this device. Talk to an electrician to see if you can combine 15A circuits to make room.

Does it matter where in the panel the 2-pole breaker goes?

No, the new 50A breaker can be placed anywhere in the panel, as long as there is enough space. The Eaton Load Centers come with an Ultra and 50A CB already installed, with the 50A CB placed at the bottom left position.

What is the clamping voltage for this product?

This device can pass 600V at the device and 25V for each inch of installation wiring. A typical installation uses 12-18 inches of wiring so from 900 to 1050+ volts of surge energy will pass into the building after installing this device.

I have installed LED light fixtures in my house, all on dimmers. When larger appliances kick on, the lights dim. Will this help smooth out the power?

No, this product is installed to ground surges coming in through the mains. As such, it will not help smooth out power for LED lights on dimmers. Check for overloaded circuits, compromised connections, failing breakers, and inadequate supply through the breaker/fuse box, among other things, to resolve the issue.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/61Wug-lovPL._SL1000_.jpg

Eaton

EATON CHSPT2ULTRA Ultimate Surge Protection 3rd Edition, 2.38" Length, 5.25" Width 7.5" Height

Item #:2791263

4.7 rating

Write a review

PKR 50997PKR 59700 You Save : 15%
0

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Universally connects to any manufacturer’s load center (breaker box).

Product Details

Brand
Voltage
Special Feature
Product Dimensions
Recommended Uses For Product
Product Dimensions
Brand
Voltage
Special Feature
Product Dimensions
Recommended Uses For Product

Features & Benefits

Quick connect design—easy to mount telephone and cable protection modules.
LED status indication.
Type 2 AC Power protection.
Indoor/Outdoor.
120/240V Surge Protective Device.
108kA/Phase, UL 1449.

Product Description

Overview

EATON CHSPT2ULTRA Ultimate Surge Protection 3rd Edition, 2.38" Length, 5.25" Width 7.5" Height

Have any Query?Chat with us

Customer Questions & Answers

Question : What is the package weight of the product?
Answer : The package weight of the product is 8 Ounces.
Question : What type of power protection does it offer?
Answer : It offers Type 2 AC Power protection.
Question : Does it have LED status indication?
Answer : Yes, it has LED status indication.
Question : Why is there only one view of the product? Do I not see the pigtail wires? Does it snap into place like a breaker?
Answer : It has 4 pigtail wires and does not snap in. 2 pigtails tie to the breaker, one wire to the neutral and one to the ground bar. It is mounted in one of the knockouts on the main breaker panel. You might have to cut an opening in the wall. If this is installed on an existing breaker panel, it is recommended to pay extra bucks for the cover plate.
Question : Can this be located on the inside of the breaker panel, provided there is enough space for it?
Answer : It is suggested to mount outside the panel as it is less effective when placed inside. However, if there is enough space to mount it inside, it can be mounted. It has to be mounted as close to the main breaker as possible so that it takes the blast before it hits the other circuits in the house.
Question : What is the length of the wires that come with the unit?
Answer : The 4 wire leads are around 13 inches long.
Question : Is this the best way to protect the whole house and all the AV equipment?
Answer : Yes, it is the best way to protect the whole house as it will fry before the surge gets to other circuits. It should be mounted as close to the main breaker as possible. Once it is tripped, it has to be replaced.
Question : Will this unit protect the home from EMP or CME?
Answer : It can protect against E3, but it is unsure if this specific model can protect.
Question : Can I connect this to a 40A range circuit breaker if my electrical panel is full?
Answer : No, you need a 50A breaker dedicated to this device. Talk to an electrician to see if you can combine 15A circuits to make room.
Question : Does it matter where in the panel the 2-pole breaker goes?
Answer : No, the new 50A breaker can be placed anywhere in the panel, as long as there is enough space. The Eaton Load Centers come with an Ultra and 50A CB already installed, with the 50A CB placed at the bottom left position.
Question : What is the clamping voltage for this product?
Answer : This device can pass 600V at the device and 25V for each inch of installation wiring. A typical installation uses 12-18 inches of wiring so from 900 to 1050+ volts of surge energy will pass into the building after installing this device.
Question : I have installed LED light fixtures in my house, all on dimmers. When larger appliances kick on, the lights dim. Will this help smooth out the power?
Answer : No, this product is installed to ground surges coming in through the mains. As such, it will not help smooth out power for LED lights on dimmers. Check for overloaded circuits, compromised connections, failing breakers, and inadequate supply through the breaker/fuse box, among other things, to resolve the issue.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

EATON CHSPT2ULTRA Ultimate Surge Protection 3rd Edition, 2.38" Length, 5.25" Width 7.5" Height

Eaton CHSPT2ULTRA is an ultimate surge protector that is installed in one of the knockouts on the main breaker panel, generally at the bottom left side. It has four pigtail wires of different lengths that need to be connected to the circuit breaker, neutral and ground bar. When the voltage rises above 300 volts, the device will short-circuit using metal oxide varistor (MOV) that has very low resistance. This way, the electricity will pass through the device instead of other devices in the house. The product also protects against E3 waves but might not protect against EMP. Users appreciated the device's simple installation and agreed it could protect the entire house from surges. Some critics complained about poor packaging, while others recommended using shorter wires' installation and highlighted the need for clear instructions.

Pros

Provides whole-house surge protection
Easy to install
Compact size
Cheap insurance for your home

Cons

Poor packaging
Installation instructions could be clearer
Wires could be longer

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

EATON CHSPT2ULTRA Ultimate Surge Protection 3rd Edition, 2.38" Length, 5.25" Width 7.5" Height

View Cart & Checkout