What type of poles can the American Ground Screw Model 3 anchor?

The Model 3 can fit round poles ranging from 1” to 2 3/8”.

How deep can the Model 3 anchor hold poles without concrete?

The Model 3 can securely anchor poles up to 18” deep without the need for concrete.

Is the Model 3 reusable?

Yes, the Model 3 is removable and reusable.

What is the inside diameter of this anchor? Will it fit a 2.5" telescoping flag pole?

The inside diameter is approximately 2.5125". It will fit a 2.5" pole, but it will be a snug fit.

Can it hold up a basketball court?

No, it cannot hold up a basketball court.

Does it come with a winding bar?

Yes, it comes with a winding bar.

Can it be left in the ground during winter?

Generally, it can be left in the ground during winter. However, there may be exceptions based on factors like frost-heaving, leaves/snow coverage, and trip hazards.

Can it hold a 2 3/8" galvanized pipe for a sun shade sail?

There is no experience with that usage, but the strength of the pole itself will determine the suitability.

How can I set your Model 3 in concrete due to soil conditions?

If you can screw it into wet concrete, it should work. Ensure that the concrete is wet during installation.

Can these be used for galvanized fence poles?

Yes, they can be used for galvanized fence poles. They provide a solid and stable support.

Do you sell screws that are 5 feet long for a 2" pipe?

Please contact the manufacturer for inquiries about custom length screws and ordering.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/21h7FvUQncL._AC_US100_.jpg

https://m.media-amazon.com/images/I/31TYxZ0M+eL._AC_US100_.jpg

https://m.media-amazon.com/images/I/31N5ys18Z+L._AC_US100_.jpg

https://m.media-amazon.com/images/I/31INfbZJKwL._AC_US100_.jpg

American Ground Screw Mfg & Supply

American Ground Screw Model 3 - Versatile Ground Anchor for Round Posts, Flag Poles & Fences - Easy Install, No-Dig 22" Screw-in Stake (Fits up to 2-3/8" Diameter Poles)

Item #:30153667

4.4 rating

Write a review

Availability : Out of stock

Imported from USA store

Search for similar products

Ships from Ubuy, Sold By :

UBNA Distribution LLC

Get notified when this item comes back in stock

Please enter valid email address.

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.)

More Options For You

Securely anchor hefty steel poles up to 18” deep without concrete with the American Ground Screw Model 3

Product Details

Effortlessly Secure Steel Poles: Our innovative anchoring solution allows you to embed hefty steel poles up to 18" deep, ensuring unparalleled stability and strength without the mess and hassle of concrete. Perfect for various applications, from fencing to signage, this system guarantees a firm hold and peace of mind in your installations
Experience unmatched convenience with our anchoring system that installs in mere minutes and is ready to bear loads instantly. Designed for efficiency, this system ensures your projects progress quickly, allowing you to move forward without delay
Flexible Design: The Model 3 features three adjustable finger screws which allow for a snug fit for various pole diameters, ensuring a wide range of applications. A Steel Winding Bar is also provided for installation
Versatile and Sustainable: Easily removable and reusable, making it perfect for both permanent fixtures and temporary setups. When not in use, our Ground Screw's sleek design makes it easy to store
Robust and Spacious Design: Our Large Heavy Duty Ground Screw, extending over 21 inches in length, accommodates posts with an outside diameter of up to 2-3/8"
Built to Last: Our Ground Screws are constructed from Hot-Dipped Galvanized Steel, ensuring all-weather durability and resistance to rust and corrosion

Product Dimensions	21.5 x 2.63 x 2.63 inches (54.6 x 6.7 x 6.7 cm)
Item Weight	5.00 pounds (2.25 kg)
Manufacturer	H&K Manufacturing
Item model number	Model-3E
Is Discontinued By Manufacturer	No
Date First Available	2021-3-22 5:36:34

Features & Benefits

No dig ground anchor
Can hold poles up to 18” deep
Easy to install, immediately loadable
Includes 3 finger screws for pole stability
Removable and reusable
Over 21 inches long for maximum stability

Have any Query?Chat with us

Customer Questions & Answers

Question : What type of poles can the American Ground Screw Model 3 anchor?
Answer : The Model 3 can fit round poles ranging from 1” to 2 3/8”.
Question : How deep can the Model 3 anchor hold poles without concrete?
Answer : The Model 3 can securely anchor poles up to 18” deep without the need for concrete.
Question : Is the Model 3 reusable?
Answer : Yes, the Model 3 is removable and reusable.
Question : What is the inside diameter of this anchor? Will it fit a 2.5" telescoping flag pole?
Answer : The inside diameter is approximately 2.5125". It will fit a 2.5" pole, but it will be a snug fit.
Question : Can it hold up a basketball court?
Answer : No, it cannot hold up a basketball court.
Question : Does it come with a winding bar?
Answer : Yes, it comes with a winding bar.
Question : Can it be left in the ground during winter?
Answer : Generally, it can be left in the ground during winter. However, there may be exceptions based on factors like frost-heaving, leaves/snow coverage, and trip hazards.
Question : Can it hold a 2 3/8" galvanized pipe for a sun shade sail?
Answer : There is no experience with that usage, but the strength of the pole itself will determine the suitability.
Question : How can I set your Model 3 in concrete due to soil conditions?
Answer : If you can screw it into wet concrete, it should work. Ensure that the concrete is wet during installation.
Question : Can these be used for galvanized fence poles?
Answer : Yes, they can be used for galvanized fence poles. They provide a solid and stable support.
Question : Do you sell screws that are 5 feet long for a 2" pipe?
Answer : Please contact the manufacturer for inquiries about custom length screws and ordering.

Customer Ratings

4.4 out of 5

166 customers ratings

5 star
67%
4 star
15%
3 star
13%
2 star
1%
1 star
4%

Review this product

Share your thoughts with other customers

American Ground Screw Mfg & Supply Model-3E Flagpole Hardware Editorial Review

The Model 3 is a sturdy ground screw that provides a sturdy mounting solution for a flag or weather station device. It will hold up in moderately weighted conditions but it may not work well in all areas of the country. To install it, you need to have soil that is properly compacted. Some customers have struggled to install it straight, and it is not easy to push it into the ground if the soil is not moist. A metal pipe can help in getting the final turning for extra torque. To get it straight, you can use a torpedo level.

Pros

Sturdy and strong
Great for mounting a flag or weather station device
Provides a solid foundation once installed correctly

Cons

Difficult to install in compacted soil
May require a metal pipe to assist in the final turn
Not easy to install even though it claims to be a "no dig" solution

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

American Ground Screw Model 3 - Versatile Ground Anchor for Round Posts, Flag Poles & Fences - Easy Install, No-Dig 22" Screw-in Stake (Fits up to 2-3/8" Diameter Poles)

View Cart & Checkout