What is the curing time for J-B Weld?

J-B Weld sets in 4-6 hours and reaches a full cure in 15-24 hours.

Can J-B Weld be used on metal surfaces?

Yes, J-B Weld provides strong, lasting repairs to metal surfaces.

What is the maximum temperature J-B Weld can withstand?

J-B Weld can withstand temperatures up to 550oF when fully cured.

Can JB Weld hold the temp without breaking if there is a crack between cylinders 5 & 7 against the head, at the narrowest point between cylinders, and both cylinders are sleeved?

JB Weld has a low tensile strength and may not hold the temperature without breaking. Consider using a high-temperature epoxy product or exploring other options such as welding or using high-tech block sealers.

Is JB Weld electrically conductive?

No, JB Weld is not electrically conductive. It is classified as an insulator and is microwave safe.

Can JB Weld be used to attach aluminum on plastic?

JB Weld can only adhere to PVC or ABS plastic, not polypropylene or polyethylene plastics.

Can JB Weld be used to fix a small crack in a dryer drum? Is there a danger it will come off on the clothes?

It is recommended to contact JB Weld directly for advice on using their products for specific purposes and temperatures.

Will JB Weld stop an exhaust leak where a donut goes flanges off of the manifold?

JB Weld is not suitable for use on automotive exhaust systems as it can disintegrate at temperatures exceeding 600°F. Seek alternative solutions for fixing exhaust leaks.

Can JB Weld be used to reinforce a rusted iron pipe joint in a home hot water boiler heating system?

JB Weld might provide some reinforcement on a clean surface, but under pressure, it may fail. Seek professional advice or a replacement for a more reliable solution.

Can JB Weld be used to reunite a broken motorcycle clutch handle?

JB Weld may work if you can achieve a good tight seal between the broken pieces. However, for a critical component like a clutch handle, it is recommended to seek a more permanent and reliable solution.

How much JB Weld would be needed to attach two pieces of aluminum measuring 5 feet by 14 inches?

Depending on the desired coverage, it is estimated that less than 20oz but more than 10oz of JB Weld may be required. However, for large and flexible panels, JB Weld may crack, and alternative adhesives like construction adhesive could be more suitable.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/81VRSk73UhL._SL1500_.jpg

https://m.media-amazon.com/images/I/81l+zUUKKfL._SL1500_.jpg

https://m.media-amazon.com/images/I/71ZeQ+0p8NL._SL1500_.jpg

https://m.media-amazon.com/images/I/81MLUt7FZ8L._SL1500_.jpg

J-B Weld

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz

Item #:3141

4.7 rating

Write a review

PKR 1962
0

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces.

Product Details

Brand
Specific Uses For Product
Material
Compatible Material
Item Form
Product Dimensions
Brand
Specific Uses For Product
Material
Compatible Material
Item Form
Package Weight

Features & Benefits

Provides strong, lasting repairs to metal and multiple surfaces
Forms a permanent bond
Can be shaped, tapped, filed, sanded, and drilled after curing
Sets in 4 6 hours
Tensile strength of 3960 PSI
Can withstand temperatures up to 550oF

Product Description

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz

Overview

About This Item

Introducing the J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz. This incredible epoxy adhesive is specially designed to provide a strong and durable bond on a variety of materials, with a particular focus on steel. J-B Weld is a trusted name in the industry, known for its high-quality and reliable products.

With the 8265S, you can expect nothing less than exceptional performance. This steel reinforced epoxy adhesive is perfect for repairing, bonding, and welding steel surfaces. With a unique cold-weld formula, this epoxy adhesive ensures a strong and lasting bond.

It is specifically formulated to work effectively even in extreme conditions, offering excellent resistance to water, chemicals, and heat. Whether you need to fix a broken steel component or reinforce a joint, this epoxy has got you covered. The 2 oz size is convenient and easy to use, making it perfect for both small repairs and larger projects. The compact packaging ensures that you have exactly the right amount of epoxy needed for your task, minimizing waste and ensuring cost-effectiveness. Not only is this J-B Weld epoxy adhesive highly functional, but it is also incredibly easy to use.

Simply follow the instructions provided, and you can achieve professional-level results in no time. Its quick-setting properties allow for fast repairs, so you can get back to using your steel objects sooner. The J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz is the ideal solution for anyone looking to repair or bond steel surfaces. Its unmatched strength, durability, and versatility make it a must-have for any DIY enthusiast, handyman, or professional in need of a reliable adhesive. Don't compromise on quality when it comes to your projects.

Have any Query?Chat with us

Customer Questions & Answers

Question : What is the curing time for J-B Weld?
Answer : J-B Weld sets in 4-6 hours and reaches a full cure in 15-24 hours.
Question : Can J-B Weld be used on metal surfaces?
Answer : Yes, J-B Weld provides strong, lasting repairs to metal surfaces.
Question : What is the maximum temperature J-B Weld can withstand?
Answer : J-B Weld can withstand temperatures up to 550oF when fully cured.
Question : Can JB Weld hold the temp without breaking if there is a crack between cylinders 5 & 7 against the head, at the narrowest point between cylinders, and both cylinders are sleeved?
Answer : JB Weld has a low tensile strength and may not hold the temperature without breaking. Consider using a high-temperature epoxy product or exploring other options such as welding or using high-tech block sealers.
Question : Is JB Weld electrically conductive?
Answer : No, JB Weld is not electrically conductive. It is classified as an insulator and is microwave safe.
Question : Can JB Weld be used to attach aluminum on plastic?
Answer : JB Weld can only adhere to PVC or ABS plastic, not polypropylene or polyethylene plastics.
Question : Can JB Weld be used to fix a small crack in a dryer drum? Is there a danger it will come off on the clothes?
Answer : It is recommended to contact JB Weld directly for advice on using their products for specific purposes and temperatures.
Question : Will JB Weld stop an exhaust leak where a donut goes flanges off of the manifold?
Answer : JB Weld is not suitable for use on automotive exhaust systems as it can disintegrate at temperatures exceeding 600°F. Seek alternative solutions for fixing exhaust leaks.
Question : Can JB Weld be used to reinforce a rusted iron pipe joint in a home hot water boiler heating system?
Answer : JB Weld might provide some reinforcement on a clean surface, but under pressure, it may fail. Seek professional advice or a replacement for a more reliable solution.
Question : Can JB Weld be used to reunite a broken motorcycle clutch handle?
Answer : JB Weld may work if you can achieve a good tight seal between the broken pieces. However, for a critical component like a clutch handle, it is recommended to seek a more permanent and reliable solution.
Question : How much JB Weld would be needed to attach two pieces of aluminum measuring 5 feet by 14 inches?
Answer : Depending on the desired coverage, it is estimated that less than 20oz but more than 10oz of JB Weld may be required. However, for large and flexible panels, JB Weld may crack, and alternative adhesives like construction adhesive could be more suitable.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz

Based on the Q&A and reviews, JB Weld seems to be a versatile product that can be used for different purposes. People have used it to fix everything from RC trucks to metal wheels on miniature wagons for the garden. It has been reported as working well to repair plastic, metal, and even PVC, making it an excellent choice for DIY repairs. Some customers reported having trouble spreading it because it was like gum, which could make the application process difficult. In those cases, it may be necessary to apply it in several stages. Although it can hold up well and is a good substitute for welding, one customer noted that the price was higher than they would have liked. Overall, JB Weld is a reliable and widely recommended product that can be used for a variety of purposes.

Pros

Can be used for plastic, metal, and PVC repairs
A good substitute for welding
Reliable and widely recommended

Cons

Can be difficult to spread
Higher price than expected.

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz

View Cart & Checkout